Loading... Please wait...
Mon-Fri, 8:00-4:30 EST - ORDER/HELP DESK

Shop By Category

Click for the BBB Business Review of this Electric Equipment & Supplies - Retail in Grand Rapids MI
Online Payments

AKSA APD-AT300 Generator (300kW)

  • Image 1
  • Image 2
Please Call for Discounted Pricing
7,951.00 LBS

Bookmark and Share

The AKSA APD-AT300 mobile diesel generator offers a heavy duty Perkins diesel engine and up to 300 kW of power at 80 dBA. A standard voltage selector switch offers quick access to 1Ph 120/240V, 3Ph 120/208V, and 3Ph 277/480V power.



  • Heavy duty Perkins diesel engine.
  • Four stroke, water cooled, turbocharged.
  • Direct injection fuel system.
  • Electronic governor.
  • Cooling radiator and fan.
  • Starter battery (with lead acid) including rack and cables.
  • Flexible fuel connection hoses and manual oil sump drain valve.
  • Replaceable fuel filter, oil filter and dry element air filter.
  • Residential grade exhaust silencer and steel bellows.
  • Block jacket water heater.
  • Operation manuals and wiring diagram documents.
  • EPA Tier 3 certified FLEX engine.


  • Marathon Electric alternator.
  • Brushless, single bearing system, flexible disc, 4 poles.
  • Insulation class H.
  • Standard degree of protection IP21/IP23.
  • Self-exciting and self-regulating.
  • Impregnated with tropical epoxy varnish.
  • Solid state Automatic Voltage Regulator.
  • Stator winding with 2/3 pitch for improved harmonics.

aksa-dsecontroller-sm.jpgDSE 7320 Controller

  • Micro-processor based design.
  • Easy push button control: STOP/RESET, MANUAL, TEST, AUTO, MUTE ALARM, and START.
  • Front panel configuration of timers and alarm trip points.
  • Automatic control of mains and generator contactors.
  • Monitors engine performance and AC power output.
  • Compatible with any two-wire start ATS.
  • NFPA110 compliant.
  • LED alarm indication.
  • Alarms include Over and Under Speed, Low and High Battery Volt, Start and Stop Failure, Charge fail, Over Current, Under / Over Generator Voltage, Low Oil Pressure, Emergency stop, High engine temperature, kW overload, Unbalanced load, and Independent earth fault trip.
  • Four configurable LED’s like Mains available, Generator available, Mains on load, and Generator on load.
  • Metering via LED display: Generator Volts (L-L / L-N), Engine oil pressure (PSI-Bar), Generator Ampere (L1,L2,L3), Engine temperature (°C&°F), Generator Frequency (Hz), Plant battery volts, Engine hours run, Mains Volts (Ph-Ph/Ph-N), Generator kVA & kWh, Generator kW as % of rated kW setting, Generator Cos (σ).

Voltage Selector Switch

  • 277/480V, 120/208V Three-phase positions.
  • 120/240V Single-phase position.
  • Kraus & Naimer / Salzer brand.
  • Four-position voltage selector switch or switch with different voltage options also available.

Convenience Panel

  • Two GFCI 20A 120V Receptacles.
  • Three 50A 240V Twist-Lock Receptacles.
  • Two 20A Single-Pole Breakers.
  • Three 50A Double-Pole Breakers.
  • Two Flanged Inlet Receptacles 125V 5-15A for Shore Power Connections.
  • Five Stud Type Quick Connect Camlok Receptacles.
  • Two-Wire Start Connection Terminal Block.
  • Voltage adjust potentiometer.

Adjustable Trip Breaker (MLCB)

  • Shunt trip installed.

Base Frame

  • Complete gen-set is mounted entirely on a heavy-duty fabricated, steel base frame.
  • Anti-vibration pads are fixed between the engine/ alternator supports and the base frame.

Fuel Tank

  • Single wall 600 gallon stand-alone base fuel tank.
  • Convenient fuel filling.
  • Capacity of 24 hours or more at full load operation.
  • Double wall and UL142 Listing optional.


  • Sound Attenuated.
  • All enclosure parts are designed with modular principles without welding.
  • Extra large doors on each side for serviceability.
  • All metal canopy parts are painted by electrostatic polyester powder paint.
  • Exhaust silencer is protected against environmental influences and is internally mounted with the enclosure.
  • Thermally insulated engine exhaust system.
  • Designed for easy lifting and moving.
  • Easy maintenance and operation.
  • Emergency stop push button is externally mounted.


  • DOT approved 20,000 lb. heavy duty trailer.
  • Dual axle design.
  • Spring axles with electric brakes.
  • 3” adjustable pintle ring, safety chains with slip hook.
  • Breakaway kit with charger.
  • Corner tie down breakers.
  • 20,000 lbs. front jack.
  • 7000 lbs. rear stabilizing jacks.
  • Diamond plate fenders and fender steps.
  • DOT approved lighting.
  • 7 pin trailer plug.
  • License plate holder.

APD-AT300 Spec Sheet

OPTIONS (Order with Generator)

  • Oil Heater
  • Alternator Strip Heater
  • Battery Heater Blankets
  • Battery Charger
  • Fuel/Water Separator
  • Remote Annunciators
  • Remote Monitoring
  • Permanent Magnet Excitation (PMG)
  • Four-Position Voltage Selector Switch
  • Trailer tool box.
  • Trailer spare tire.
Standby Power - 3 Phase:
300 kW / 375 kVA
Prime Power - 3 Phase:
275 kW / 343.5 kVA
Standby Power - 1 Phase:
190 kW / 190 kVA
Prime Power - 1 Phase:
170 kW / 170 kVA
Voltage - 3 Phase Options:
127/208 or 277/480
Voltage - 1 Phase Option:
Power Factor:
0.8 (3Ph), 1.0 (1Ph)
Marathon Electric MP-217-4A / 432CSL6210, 4-pole, Revolving field, Single bearing, Brushless with AVR, Class H insulation
Receptacles (Single Phase):
Two GFCI 20A 120V Receptacles, Three 50A 240V Twist-Lock Receptacles
Sound Level:
80 dBA
Perkins 2206D-E13TAG2, 4-Stroke, Water-cooled, Turbocharged, 6-cylinder, 12.5 L, 130 x 157 Bore & Stroke, 1800 rpm
Engine Starting System:
Fuel / Tank Capacity:
Diesel / 600 gallons
Fuel Consumption:
22.98 gph @ full load, 12.68 gph @ half load
EPA Tier 3 Flex
Dimensions LxWxH (inches):
281 x 88 x 132 (with trailer/tank)
Dimensions LxWxH (inches):
178 x 58 x 88 (without trailer/tank)
Dry Weight:
7951 lb. (without trailer/tank)
Limited Warranty:
12 Months / 2000 Hours. Please contact us for full details.

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Recently Viewed