These indoor surface mount transfer switches are designed for fast installation in residential and commercial applications. The 18-inch flexible conduit whip attaches easily to the load center and all wires are clearly marked. Simply select the circuits needed in an emergency and connect them to the Pro/Tran wire leads.

Pro/Tran transfer switches feature a rugged powder-coated steel cabinet with six combination 1/2-inch and 3/4-inch knockouts, resettable branch rated circuit breakers and non-defeatable (break-before-make) double-throw switches. Some models feature exclusive Reliance wattmeters with accuracy of ± 3% throughout the entire range.

A wattmeter panel (WP7500) is available for all models without meters (except models 15114A and 30114A). The wattmeter panel includes an opening, with cover, for an optional power inlet.

The Reliance Pro/Tran R Series (NEMA 3R) transfer switches are ideal for outdoor installation in residential and commercial applications. The gasketed steel cabinet is powder-coated, with padlockable cover, and will accommodate the generator cord with the cover closed. Included is 16-inch length of flexible non-metallic, liquid-tight conduit with fittings. Simply mount the cabinet, attach the conduit and feed the clearly-marked wires from the transfer switch into the load center. Then select the load center circuits needed in an emergency and connect them to the wires leads from the transfer switch. Each cabinet includes six combination 1/2-inch and 3/4-inch knockouts, one on each side, two on the bottom and two on the back.

All Raintight Pro/Tran transfer switches feature branch-circuit rated breakers, heavy-duty power inlet and non-defeatable (break-before-make) double-throw switches. All 125/250V models feature exclusive Reliance wattmeters with accuracy of ± 3% throughout the entire range.

The Pro/Tran Q Series features 1-inch interchangeable circuit breakers. A 30A double-pole circuit breaker and a 20A double-pole circuit breaker, to handle heavier loads on the generator side, are included on each model. The balance of the circuit breakers are single-pole 15A.

The 15A circuits in the transfer switch may be connected to 15A or 20A circuits in the load center. Circuits are limited to 15A only on the generator side of the switch. Circuit breakers in the transfer switch are easily replaced. The spaces containing the 30A and 20A double-pole circuits may be replaced with 15 or 20A single-pole breakers if desired.

All models are suitable for hardwire connection. Cord connection is facilitated with the optional flanged inlets for direct connection to the transfer switch or the PB Series power inlet box for remote connection.

The Easy/Tran manual transfer switch is ideal for single-circuit applications such as furnaces or sump pumps. They are economical and easy to install.

The Panel/Link TRC offers circuit breaker combinations of 30A - 125A utility and generator. Interlinked circuit breakers keep the generator isolated from the utility at all times, even with the cover or deadfront removed. The TRC is service entrance rated and may be used as a main panel or a sub-panel. The TRC features a heavy-duty copper bus. The TRC is available in indoor and outdoor enclosures and has provision for 12 to 20 branch circuits. The Panel/Link TRC is available with and without power inlets or wattmeters.

The Panel/Link TCA offers circuit breaker combinations of 60A - 125A utility and 30A - 125A generator. The interlinked circuit breakers keep the generator isolated from the utility at all times, even with the deadfront removed. The TCA features a heavy-duty copper bus. The TCA is suitable for service entrance and may be used as a main panel for a single load or to feed a sub-panel. Available in indoor and outdoor enclosures, the TCA has no provision for branch circuits breakers.

The Panel/Link TTT includes a 150A utility main breaker and a 30A - 125A generator breaker. The circuit breakers are interlinked to keep the generator isolated from the utility at all times, even with the deadfront removed. The TTT features a heavy-duty copper bus. The TTT is suitable for service entrance and designed as a stand-alone, generator-ready load center. Available in indoor and outdoor enclosures, the TTT has provision for 26 branch circuits. Power inlet not included.

The Panel/Link TTV includes a 200A main circuit breaker interlinked with 30A - 125A generator circuit breaker. The interlinked circuit breakers keep the generator isolated from the utility at all times, even with the cover or deadfront removed. The TTV features a heavy-duty copper bus. The TTV is suitable for service entrance and provides for 36 branch circuits. Dual wattmeters, for balancing generator load, are optional.

The Panel/Link TWB includes a 150 main circuit breaker interlinked with a 30A - 125A generator breaker feeding a heavy-duty copper bus with feed-through lugs. The interlinked circuit breakers keep the generator isolated from the utility at all times, even with the deadfront removed. The TWB is suitable for service entrance and may be used as a main panel or feed-through to a sub-panel or main panel. The TWB has provision for 4/8 branch circuits and is ideal for applications requiring the entire service panel to be available for generator power.

The Panel/Link TWB includes a 200A main circuit breaker interlinked with a 30A - 125A generator breaker feeding a heavy-duty copper bus with feed-through lugs. The interlinked circuit breakers keep the generator isolated from the utility at all times, even with the deadfront removed. The TWB is suitable for service entrance and may be used as a main panel or feed-through to a sub-panel or main panel. The TWB has provision for 4/8 branch circuits and is ideal for applications requiring the entire service panel to be available for generator power.